SOLUTION
Products
Equipment Design & Test Equipment
- Hydrogen-test facility
- Explosion-test facility
- Testing machine for research
- Mechanical equipment and systems
- PLC & HMI
Applications
Hydrogen parts test environment control chamber and test facility
Compliance
KSB ISO 19880-3 , GTR-13
Advantages & Features
- Hydrogen gas pressure cycle test
- Severe condition pressure cycle test
- Non-metal material test
- Operation cycle test
- Operation test
- Pressure impact test
- Maximum pressure operation test
- Cooling gas valve test
- Maximum flux interruption test
Specifications
Performance evaluation of hydrogen transportation·storage parts
- Fatigue and pressure cycle facility
- Explosion-proof temperature control chamber (-40°C~85°C)
- Leak test facility (90MPa, leak tester)
- Other attached facility (explosion-proof, control, cooling facility (-40°C))
Performance evaluation of products using hydrogen
- Storage equipment performance test facility (MFC, etc.)
- Product’s flux characteristic performance assessment facility (valve, regulator, etc.)
- Other attached facility (explosion-proof, control, cooling facility (-40°C))
Hydrogen product performance assessment
- Fatigue and pressure cycle facility(140MPa)
- Explosion-proof temperature control chamber (-40°C~85°C)
- Leak test facility (90MPa, leak tester)
- Other attached facility (explosion-proof, control, cooling facility (-40°C))
Applications
Hydrogen parts test environment control Chamber
Compliance
KSB ISO 19880-3, GTR-13
Advantages & Features
- Hydrogen gas pressure cycle test
- Severe condition pressure cycle test
- Non-metal material test
- Operation cycle test
- Operation testressure impact test
- Maximum pressure operation test
- Cooling gas valve test
- Maximum fluxinterruption test
Specifications
- Size : I/D 1000 xT/L 1500 mm
- Mat.L : SA-240 316L
- Thickness : Shell 10t , Head 12 t
- Design Pressure : 20 Bar
- Design Temp. : 100 °C
- Operating Temp. Range : -45~90°C
- Kind of Fluid : H2
- Code : ASME SEC. VIII. DIV.1
- Door : Automatic Door
- Component test-bed
- Sight Glass
- Feed-through : Sensing & measurement
Applications
Hydrogen parts test environment control chamber
Compliance
KSB ISO19880-3
Advantages & Features
- Leak test (inside/outside leakage test)
Specifications
- Size : I/D 600 xT/L 1000 mm
- Mat.L : SA-240 316L
- Thickness : Shell 10t , Head 12 t
- Design Pressure : 20 Bar
- Design Temp. : 100 ℃
- Operating Temp. Range : -45~90℃
- Kind of Fluid : H2
- Code : ASME SEC. VIII. DIV.1
- Door : Automatic Door
- Component test-bed
- Sight Glass
- Feed-through : Sensing & measurement
Applications
Explosion pressure (reference pressure) measurement and explosion flammability test equipment
Compliance
IEC/EN/KS C IEC 60079-1
Advantages & Features
- Explosion pressure measurement and explosion flammability test for explosion-proof products
- Internal explosion can be checked by installing high speed camera
- Easy to mix explosive gases with flow control system with HMI
- Automatic calculation sensors explosion pressure peak value and rising time
Specifications
Range of gas mixture-oxygen concentration for analysis: 0~100% / 0~0.5% Accuracy: 0.02% O2
Explosion pressure measurement: Pressure sensor: 0~250 bar, Overload up to 500 bar
Pressure transmitter for process flow measurement
Pressure range : -1~10bar
Gas mixing system and gas control system
- Mass Flow Controller (MFC) : Bronkhorst EL-Flow series
- Gases : Air, H2, C2H2, C2H4, C3H8
- Totalmixedgasflow:200lpm이상
- Input pressure(P1) : 3 bar 이상
- Output pressure(P2) : 2 bar 이상
Applications
Equipment for explosion pressure (reference pressure) measurement and explosion ignition test for explosion- proof structural electrical equipment
Compliance
IEC/EN/KS C IEC 60079-1
Specifications
Product name : Explosion test chamber (explosion-proof)
Use : Explosion test
Size : D 2,000 X L 3,000 (mm)
Specification : Design pressure 35 bar, Motor drive, Opening and closing hydraulic clamp
Major components : Vacuum pump, Safety valve, Hydraulic device, Sensors, Control and measurement system, Monitoring system
Client : ICR Co., Ltd.
Applications
Gas and dust explosion test, mechanical explosion test, international explosion certification test
Compliance
IEC/EN/KS C IEC 60079-1
Specifications
Product name : Marine explosion functional safety test facility explosion test device
Use : Explosion test, mechanical parts explosion test, international explosion proof certification test Size : D 3,000 X L 4,000 (mm)
Specification : Allowable internal pressure 45 bar, motor drive, opening and closing hydraulic clamp
Major components : Vacuum pump, Safety valve, Hydraulic device, Sensors, Control and measurement system, Monitoring system
Client : Korea Institute of Marine Equipment, Ulsan Headquarters
Applications
For verifying the safety of major parts of earthwork machinery in case of internal /external explosion
Compliance
MIL-STD-810 G
Specifications
Product name : Explosion Entnt Test Chamber
Use : Safety verification chamber for internal
External explosion of major parts of earthwork machinery
Size : D 1,800 X L4,000 (mm)
Specification : Allowable internal pressure 39 bar, motor drive, opening and closing hydraulic clamp
Major components : Sampling chamber, hexane supply device, monitoring system, control and measurement system
Client : Construction Equipment Research Institute
Applications
Equipment for explosion pressure (reference pressure) measurement and explosion flammability test of explosion-proof electrical equipment
Compliance
IEC/EN/KS C IEC 60079-1
Specifications
Product name : Explosion flammability test equipment
Use : For reference pressure and flammability test of explosion equipment
Size : D 1,600 X L 3,200 (mm)
Specification : Allowable internal pressure 50 Bar, hydraulic clamp, forced exhaust system
Major components : Vacuum pump, Safety valve, Hydraulic device, Sensors, Control and measurement system, Monitoring system
Client : Korea Gas Safety Corporation Explosion Test Certification Department
Applications
Projectile real shooting test chamber for vehicle structure survivability test
Compliance
IEC/EN/KS C IEC 60079-1
Specifications
Product name : Projectile real shooting test chamber
Use : For simulation of explosion and firing for vehicle structure survivability test
Size : D 2,000 X L 3,500 (mm)
Specification : Allowable internal pressure 25 bar, automatic switch, trailer mobile type
Major components : Specimen fixing device, hydraulic device, control and measurement system, monitoring system
Client : Agency for Defense Development (Haemi Aviation Test Center)
Applications
Used to check whether the seal of an explosion-proof electrical device can withstand the internal explosion pressure
Compliance
IIEC/EN/KS C IEC 60079-1, Obligatory safety certification notice for protective devices (Ministry of Labor Notice No. 2008-76)
Specifications
Product name : Hydrostat Water Pressure Test Facility
Use : For testing safety of explosion equipment
Size : D 1,000 X L 1,500 (mm)
Specification : Allowable internal pressure 109 bar, Hydraulic unit
Major components : Hydraulic system, JIB crane, Control system, Pressure & temp. sensor
Client : Korea Shipbuilding & Marine Equipment Research Institute Ulsan Headquarters
Applications
Explosion certification test equipment
Compliance
IEC/EN/KS C IEC 60079-1
Specifications
Product name : Internal explosion pressure tester
Use : Explosion certification test
Size: -
Specification: -
Major components : -
Client : ICR Co., Ltd./ KOMERI
Applications
Explosion certification test equipment
Compliance
IEC/EN/KS C IEC 60079-11
Specifications
Product name : Spark Ignition tester
Use : Explosion certification test Size: -
Specification: -
Major components : -
Client : ICR Co., Ltd./ KOMERI/ KOSHA
Applications
Explosion certification test equipment
Compliance
IEC/EN/KS C IEC 60079-0
Specifications
Product name : Small component ignition tester
Use : Explosion certification test
Size: -
Specification: -
Major components : -
Client : ICR Co., Ltd.
Applications
Flame arrest performance test equipment
Compliance
-
Specifications
Product name : Pneumatic pressure test equipment
Use : Flame arrest performance test
Size: -
Specification: -
Major components : -
Client : B&G Co., Ltd.
Applications
Explosion certification test equipment
Compliance
IEC 60079-20-1
Specifications
Product name : MESG
Use : Explosion certification test
Size: -
Specification: -
Major components :
Pressure, Temp. sensor, Spark unit
Client : ICR Co., Ltd. / KOMERI
Applications
Test equipment for measuring gas composition in places with hazards such as explosion, poisoning, and suffocation
Compliance
IEC 60079-29-1,4
Specifications
Product name : Gas detector testing system
Use : -
Size : Testing Volume : 800mm X 500mm X 500mm
Specification
- Temperature variation: within ±1°C of -30°C ~ 65°C
- Pressure variation : within ±1kPa of 70kPa ~ 130kPa
- Humidity variation: within ±3%RH of ~95%PH
- Air velocity: 0 m∕s ~ 6 m∕s
Major components : -
Client : Korea Shipbuilding & Marine Equipment Research Institute Ulsan Headquarters
Size : Testing Volume : 800mm X 500mm X 500mm
Specification
- Temperature variation: within ±1°C of -30°C ~ 65°C
- Pressure variation : within ±1kPa of 70kPa ~ 130kPa
- Humidity variation: within ±3%RH of ~95%PH
- Air velocity: 0 m∕s ~ 6 m∕s
Major components : -
Client : Korea Shipbuilding & Marine Equipment Research Institute Ulsan Headquarters
Applications
Explosion certification test equipment
Compliance
IEC/EN/KS C IEC 60079-0
Specifications
Product name : Air permeability tester
Major components : Differential pressure sensor, flow sensor, pressure sensor
Client : ICR Co., Ltd.
Applications
Bubble test
Compliance
ISO 4003
Specifications
Product name : Bubble tester
Major components : Pressure gauge, electric motor
Client : B&G Co., Ltd.
Applications
Explosion certification test equipment
Compliance
-
Specifications
roduct name : O-ring compression tester
Major components : Dial gauge
Client : ICR Co., Ltd.
Applications
Explosion certification test equipment
Compliance
IEC60079-1 Annex C3.1
Specifications
Product name : Cable gland sealing test device
Major components : Adapter, high pressure Hose
Client : ICR Co., Ltd.
Applications
Explosion certification test equipment
Compliance
IEC 60079-20-1
Specifications
Product name : Breathing Device Explosion History Tester
Major components : Pressure Sensor, Spark Ignition
Company to deliver : ICR Co., Ltd.
Applications
PTB Ex test sample
Compliance
IEC 60079-1
Specifications
Product name : PTB Ex test sample
Major components : -
Client : ICR Co., Ltd.
Applications
Grouser traction performance measurement
Compliance
-
Specifications
Product name : Grouser traction performance tester
Major components : Load cell, displacement sensor, deadweight
Client : Seoul National University Department of Agricultural Mechanical Engineering
Applications
6 Components measuring instruments for a tractor
Compliance
-
Specifications
Product name : 6 Components measuring instruments
Use : Tractor performance evaluation
Size: -
Specification: -
Major components : -
Client : National Academy of Agricultural Sciences
Applications
Torque sensor tester
Compliance
-
Specifications
Product name : Torque sensor tester
Major components : -
Client : -
Applications
Gyro Repeater
Compliance
MIL-S-901D, MIL-STD-167-1A
Specifications
Product name : Gyro Repeater
Major components : Vessel
Client : MK
Applications
Sliding test
Compliance
-
Specifications
Product name : Sliding tester
Major components : -
Client : JINSOL
Applications
Vibration test
Compliance
IEC 60079-29-1,4
Specifications
Product name : Vibration tester
Use : Vibration tester
Size : Working Table 1500 x 1500 mm
Specification: -
Major components : Inverter Motor , Working table , Base Frame , Crank Shaft Wheel
Client : YJ Solution
Applications
IP Test
Compliance
IEC 60529
Specifications
Product name : IP Tester
Major components : AUTO-IPX34A, AUTO-IPX56A, AUTO-ROOM
Client : Techcross, KOMERII
Applications
Space Satellite Environment Test
Compliance
-
Specifications
Product name : IR-heating system
Major components : IR-Heater , Temp.sensor
Client : KARI
Applications
Space Satellite Environment Test
Compliance
-
Specifications
Product name : IR-heating system
Major components : IR-Heater , Temp.sensor
Client : TOMS
Applications
EDF test
Compliance
-
Specifications
Product name : Test league for a thrust device test for securing altitude
Major components : -
Client : KARI
Applications
분산 추진 프로펠러 성능시험
Compliance
ISO 18646-2, IEC 61496-4-3
Specifications
Product name : Distributed propulsion propeller performance test device
Major components : Load Cell
Client : KARI
Applications
Robotics –Obstacle Avoidance Test
Compliance
SO 18646-2, IEC 61496-4-3
Specifications
Product name : Robotics –Obstacle Avoidance test equipment
Major components :
Battery control, Servo control unit
Client : -
Applications
Determination of Biomechanical stress Limits methodology test
Compliance
-
Specifications
Product name : Pain test device
Major components : Load Cell, Famos & IMC
Client : Department of Robotics, Kyunghee University
